Attempting to restore system image to new HDD, getting error message no matter what approach I use.
Hello.
My internal Hard drive recently crashed, so I've replaced it with a new one of identical specs.
I then tried to restore my computer onto the new HDD, from a System Image I had created on an external hard drive.
In every attempt to do so, I failed.
First, I attempted to restore the System Image without having installed windows 7 onto the new HDD.
This did not work.
Then, I tried again after installing windows 7 onto the new drive:
- I tried to restore from the system image by going the control pannel, and once I got into the repair program I was told that I need to do this process using the Repair Disk, or windows install disk 7
- So I booted from the Windows install disk, and tried again to restore from the system image located on my external hard drive.
I received an error message telling me that the "System Image Restore failed" because "No disk that can be used for recovering the system disk can be found."
Here's the thing, up to this point it has had no problem seeing the new HDD.
It even gave me the option to exclude the new HDD.
I did not exclude it.
In the error message "details," it recommended that I type "LIST DISK" command into "DISKPART command interpreter."
I check it and my new HDD shows up ad disk 0.
As I already said, I didn't chose to exclude the disk.
It suggested that a USB disk may have been assigned as a system disk, but I have no USB disks attached, other than the one with the System image on it.
Earlier in the process I was assured that that External Hard Drive was being excluded, due
to it having the System image on it.
I even double checked in the command prompt that the new HDD was being seen as the system disk.
It is.
Finally it says that an Invalid disk may have been assigned as the system disk.
If this is the case I do not know why the new HDD would be invalid.
The only information I've learned so far from the forum is that the new HDD must be as big as the old one.
MY new HDD is as big as the old one.
Please, help me figure out what is wrong.
I don't have any way of removing the information from my old HDD, my only option is to use the system disk.
P.S, If it turns out that I am unable to restore my system onto a new HDD using system image, then the person responsable for the program should feel bad about themselves, as they are a bad person.
Keys to the Problem Attempting to restore system image to new HDD, getting error message no matter what approach I use.
Download SmartPCFixer for Free Now
The native image restore facility is very basic and also quite temperamental.
Microsoft did a lousy job when it released it for Windows 7.
I have stopped using it in favour of Acronis True Image which costs money but is a fully featured and reliable product.
About your current problem: From other posts on the same subject I gather that it is most likely caused by your new disk being slightly smaller than the old disk.
A difference of a few bytes is lethal.
Products like TrueImage take this in their stride but
Windows image restore cannot cope with it.
I cannot guarantee that a larger disk will work but it probably will.
If so then you should put the current disk in a USB case and use it from now on for your regular weekly backups.
In this method we will try to Boot in Safe mode with Networking and see if the error still persists.
- Search "MSCONFIG" and Open.
- Click on Boot Tab
- Tick Safe Boot in Boot Option
- Select Network.
- Click Apply and OK.
- Reboot your System.
Another Safe way to Fix the Problem: Attempting to restore system image to new HDD, getting error message no matter what approach I use.:
How to Fix Attempting to restore system image to new HDD, getting error message no matter what approach I use. with SmartPCFixer?
1. Click the button to download SmartPCFixer . Install it on your system. Open it, and it will perform a scan for your system. The junk files will be shown in the list.
2. After the scan is finished, you can see the errors and problems need to be repaired. Click Fix All.
3. The Fixing part is finished, the speed of your computer will be much higher than before and the errors have been fixed.
Related: AMD Radeon HD 7800M Win8 not working [Anwsered],I can access the internet, get on facebook and get to hotmail, but I can't play games on facebook and I can't open or respond to my e-mails,I keep getting this Media Player error when I log on my computer. [Anwsered],[Anwsered] System Hanging on shutdown and restart,Unable to get the Vlookup property of the WorksheetFunction class,Solution to Error: Error: "0x81000032 make sure the C: drive is online and set to NTFS" when trying to backup to external hard drive.
,Troubleshoot:External Hard Drive not listed in Windows 7 backup wizard Error
,I'm always being signed off so annoying Tech Support
,Solution to Problem: Impossible to use Internet Explorer! I keep getting the same error message every time i try to use IE.
,Solution to Problem: Referencing data in another file
,Troubleshoot:Error: "0x81000032 make sure the C: drive is online and set to NTFS" when trying to backup to external hard drive. Error,External Hard Drive not listed in Windows 7 backup wizard Tech Support,Tech Support: I'm always being signed off so annoying,Solution to Problem: Impossible to use Internet Explorer! I keep getting the same error message every time i try to use IE.,Referencing data in Access using Excel [Anwsered],Need Best Way To Present Data [Anwsered],Same question but for windows 7 home edition,sometimes fullscreen won't activate [Solved],Solution to Error: We bought a new computer with windows 7 and it is constantly freezing. How do we fix this?,Solution to Error: Windows 8 update crash (2013-07-22)
Read More: Tech Support: At startup an error message says \"Windows failed to start. A recent software or hardware change may be the cause\". I startup using \"launch startup repair\" option, but this results in a blue screen. What is the fix to problem?__,Back up failed to restore,ATI TV Wonder 600 USB 2.0; high speed USB says it is compatible in Windos 7 32 bit, but not for 64 bit. Is there a way to run the driver in 32 bit? [Solved],How to Fix Problem - Backup Not Incremental?,Automatically add a formula to a cell when it is inserted in a particular column,application not found error,any problems in a team where one has Windows XP and the other has Windows 7?,Application/Object-Defined Error,An Excel formula question where hours are totalled and cumulating,Anyone know the hardware email?
No comments:
Post a Comment